Plastic Pall Ring Packing

7 years manufacturer of Plastic Pall Ring; Material: PP PE PVC CPVC PVDF etc Size:16mm 25mm 38mm 50mm 76mm ISO9001:2000

Plastic pall ring is made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chloridized polyvinyl chloride (CPVC) and polyvinylidene fluoride (PVDF). It has features such as high free volume, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so on, and the application temperature in media ranges from 60to 150. For these reasons it is widely used in the packing towers in petroleum industry, chemical industry, alkali-Chloride industry, coal gas industry and environmental protection, etc.

Physical & chemical properties of plastic random packing

Performance / Material	PE	PP	RPP	PVC	CPVC	PVDF
Density (g/cm3)	0.94-0.96	0.89-0.91	0.93-0.94	1.32-1.44	1.50-1.54	1.75-1.78
Operation Temp. ()	90	>100	>120	>60	>90	>150
Chemical corrosion resistance	Good	Good	Good	Good	Good	Good
Compression Strength(Mpa)	>6.0	>6.5	>7.0	>6.0	>8.0	>10.0

Technical data  

Spec.	D*H*T (mm)	Number per m³	Bulk density (kg/m³)	Surface area (m²/m³)	Free volume (%)	F factor (m-1)
Dg16	16*16*1.1	112000	141	188	91	249
Dg25	25*25*1.2	53500	150	175	90	239
Dg38	38*38*1.4	15800	98.0	115	89	220
Dg50	50*50*1.5	6500	74.8	112	90	154
Dg76	76*76*2.6	1930	70.9	73	92	94

Note: The above data are reference to material PP.

Plastic Pall Ring Packing